 |
| Name: |
HP 5890 Series
II with EPC, FID |
| Item: |
#739 |
| Pirce: |
|
| |
 |
| Includes single Split/Splitless
Injector with Electronic Pressure Control,
Flame Ionization Detector, INET Communications
installed on GC, cables, manuals and ONE
(1) YEAR WARRANTY. Other injectors
and detectors available. HPIB Communications
and Data System available. |
 |
|
Back
|
|
| Specifications: |
| Heated Devices |
Five heated zones standard: Two detectors, Two inlets,
one auxiliary
Methods stored: Two |
| Split/Splitless
Capillary |
Range to 400°C in 1°C increments
Back-pressure design permits independent adjustment
of split flow rate without affecting column flow
Septum purge built in at 3 ml/min
Accepts columns up to 1.2-mm od
Multimode design includes split and splitless injection
Splitless purge time variable in 0.01-min elements |
| Electronic Pressure
Control |
Pressure Control
> Programming: Three ramps, 0.1-99 psi/minute
> Pressure Range for inlets: 1-100 psi
> Flow range for inlets: 0-450 ml/min
> Constant Flow Mode (Standard): Inlet pressure
is adjusted real time to maintain constant volumetric
flow at column outlet.
> Maximum Channels: Two inlet channels to control
column head pressure, Four auxiliary channels to
control split vent flow (Gas Saver EPC), makeup
gas, fuel gases, or external devices (general-purpose
EPC)
Precision and Accuracy
> Pressure Setpoint Accuracy: +/- 0.1 psi
> Flow Setpoint Accuracy: +/- 0.001 ml/min
> Average Linear Velocity Accuracy: +/- 0.1 0.001
cm/sec. |
| Flame Ionization
Detector |
Range to 450°C
Grounded jet and current limited design for operator
safety
Push-button flame ignition
Sensitive:
> 18 mCoul/gm carbon: nitrogen carrier, 0.018-in.
id jet
> 15 mCoul/gm carbon: helium carrier, 0.018-in.
id jet
> 22mCoul/gm carbon: nitrogen carrier, 0.018-in.
id capillary jet
> 18 mCoul/gm carbon: helium carrier, 0.018-in.
id capillary jet
Minimum detectable: <5 pg carbon/sec, nitrogen
carrier at S/N=2
Linear dynamic range: <+/- 10% over a 107
range with 0.018-in. id jet
Conditions: column flow 50 ml/min, 45 ml/min H2,
650 ml/min air, propane sample |
| Column Oven |
Operating range: 4° C above ambient to 450° C
Setpoint entry: 1° C for temperatures, 0.1° C for
program rates
Programming: Rates 0.1 to 70° C per min, 650 min
maximum run time, three ramps with initial/final
holds |
